Beulah Concrete
Readymix concrete specialists — rural, residential, commercial
Servicing the Eastern Bay of Plenty

Concrete additives for strength, workability and durability matched to your project

Adjust setting time and workability to suit your pour
Access high early strength mixes when your programme needs strength sooner
Choose fibre reinforced mixes for added crack control and toughness
Contact Beulah Concrete to discuss additives and mix requirements before booking your pour. Serving Whakatāne, Ōpōtiki, Kawerau and Kaingaroa, within roughly 50 km of Beulah Concrete’s three Eastern Bay of Plenty batching plants.

Make placing easier and plan for the strength you need

Concrete that stiffens too quickly can be difficult to place and finish. Slow strength gain can also hold up the next stage of work, while cracking and shrinkage concerns may call for more than a plain mix.

Beulah Concrete discusses your pour conditions, placement method and programme before the mix is booked. Retarder, accelerator, plasticiser, fibre and high early strength options can then be considered against the job’s requirements.

Mix designs follow your engineer’s specification or are developed with plant engineering support. Plant-dosed admixtures, weighed and measured batching, and regular production testing support consistent supply for rural, residential and commercial projects.

Concrete admixtures and mix options at a glance

  • Beulah Concrete supplies readymix with plant-dosed admixtures, fibre and high early strength mix options.
  • Delivery covers Whakatāne, Ōpōtiki, Kawerau and Kaingaroa, within roughly 50 km of three Eastern Bay of Plenty plants.
  • Mix options support rural, residential and commercial builders and contractors, including engineered civil projects.
  • Pour conditions, placement method and programme are discussed before the mix is booked.
  • Retarder is available where concrete stiffening too quickly is a concern.
  • Accelerator and high early strength options can be considered where the programme needs strength sooner.
  • Plasticiser is available to adjust workability for placing, compacting and finishing.
  • Fibre reinforced concrete is available for added crack control and toughness.
  • Concrete strengths range from 17.5 to 50 MPa, with mix designs matched to project specifications.
  • Production operates under the Concrete NZ Plant Audit Scheme, quality assured to NZS 3104, with qualified lab technicians and plant engineering support.

Adjust setting time and workability before delivery

Hot weather, long truck runs and large pours can make concrete stiffening a practical concern. Retarder can be considered when more working time is needed, while accelerator is an option where setting needs to be adjusted in the other direction.

For stiff or harsh mixes that are difficult to place, compact or finish, plasticiser provides a workability option. Beulah Concrete selects and doses admixtures at the plant after discussing the pour, helping match the delivered mix to site requirements.

Match strength and fibre options to the specification

The right strength is the strength your project requires—not simply the highest MPa available. Beulah Concrete supplies mixes from 17.5 to 50 MPa, with high early strength designs available where the programme calls for strength sooner.

Fibre reinforced mixes offer added crack control and toughness. Confirm fibre requirements and other additive options before delivery so the mix follows the project specification, with plant engineering support available for mix design.

Qualified lab technicians carry out regular production testing. Strength testing records are also available where engineered projects require documented results.

Frequently Asked Questions

Retarder can provide more working time where hot weather, long truck runs or large pours make early stiffening a concern. Beulah Concrete can discuss whether it suits your pour conditions.

Plasticiser is available to adjust workability where a mix is stiff or harsh, helping with placing, compacting and finishing.

Beulah Concrete offers high early strength mixes where the programme requires strength sooner. Accelerator may also be considered to adjust setting time, depending on the job’s requirements.

Fibre reinforced mixes are available for added crack control and toughness. Fibre requirements should be confirmed against the project specification before delivery.

Share your pour conditions, placement method, programme and any engineer’s specification before booking. Mix design can be supported by the plant engineer, with admixtures selected and dosed at the plant.
What: Beulah Concrete supplies readymix concrete with plant-dosed admixtures, fibre reinforcement and high early strength options matched to project specifications.
Where: Beulah Concrete delivers across Whakatāne, Ōpōtiki, Kawerau and Kaingaroa, within roughly 50 km of three Eastern Bay of Plenty batching plants.
Who for: Beulah Concrete supplies rural, residential and commercial builders and contractors, including contractors undertaking engineered civil work.

Send us a message

For a free consultation or quote, please send us a message
Readymix concrete specialists — rural, residential, commercial
Servicing the Bay of Plenty